Eurowise - Lift Kit 3" - VW Touareg / Cayenne Gen. 2 (2010-2017) with coil spring

SKU: EWOCTQLK22

Price:
Sale price€1.080,00

Tax included Shipping calculated at checkout

Description

    Eurowise 3" lift kit for the first generation of the Porsche Cayenne & VW Touareg

    Machined from a solid block of 6061 aluminum, these lift kits will never wear out or fail.

    This is a bolt-on lift kit that installs on top of the OEM front shock absorber and between the upper shock absorber mount and the rear spring. Requires removal of the front and rear shock absorber assemblies and lowering of both subframes. The front shock absorbers do not need to be removed.

    What makes this kit different from the competition? We include a shock shaft extension that accommodates the spacer you install between the spring and the shock mount. This keeps the spring rate, travel, and ride quality the same as the original equipment. This also results in better performance on the trails.

    Strut extensions are available for vehicles with and without electronic damping. To install, disconnect the connector, route the wiring harness through the center of the extension, and then reinstall the connector.

    Suitable for:

    • 2011-2018 Volkswagen Touareg (with steel coil spring suspension)
    • 2011-2018 Porsche Cayenne (with steel coil springs)

    Scope of delivery:

    (2) Front spacers with hardware

    (2) Rear spacers

    (2) Rear shock absorber extensions

    (1) Loctite for rear shock absorber extension

    (1) 1" subframe lowering kit

    Additional options:

    After more than four years of research and testing on hundreds of vehicles, we've discovered that the front and rear driveshaft dust boots can crack or separate from the subframe, resulting in slight changes in drive angles. In some cases, this may be unavoidable due to worn original boots.

    While not essential, a transmission spacer offers significant benefits by maintaining the correct angles in the driveline and extending the life of the rubber boots. This kit includes a transmission and driveshaft spacer, plus a new center mount that replaces the original mount, eliminating the risk of friction.

    Select the transmission mount thickness based on your subframe size. If you have a 1/2-inch subframe drop, the center support mount spacers are not included.

    Click here for the product -> Kick <-

    Without electronic damper:

    With electronic damper:

    Useful:

    Tire sizes

    Assembly instructions

    Note: The physical thickness of the spacers does not reflect the actual lift height. Don't be alarmed if your spacer isn't 2.5" thick.

    Install at your own discretion; professional installation is recommended. We are not responsible for any damage that may occur due to improper installation and/or use.

    Please note: Currently without parts certificate! Registration only possible via §21. Certificate in progress.

    You might like it too:

    Last seen: